Fuji Electric FRENIC-Ace series - Page 370

5.3 Description of Function Codes
5-200
■ Gain and bias
Terminal Data
[12]
[C1] (C1) function
[C1] (V2 function)
(Example) In order to allocate for the range of 0 to 100% to the range of 1 to 5 V at terminal [12], set as follows.
Reference frequency
Gain
Bias
Bias base
point
Gain base
point
Point B
Point A
Analog input
Reference frequency
Gain
Bias
Bias base
point
Gain base
point
Point B
Point A
Analog input
Reference frequency
Gain
Bias
Bias base
point
Gain base
point
Point B
Point A
Analog input
Gain
Gain base point
Bias base point
Bias
Terminal [12] input
Process command