Fuji Electric FRENIC-Ace series - Page 524

9.2.7 Other services ·························································································· 9-24
9.2.8 Object list ································································································ 9-25
[ 1 ] Objects in the communication profile area ························································ 9-25
[ 2 ] Objects in the profile area specific to Fuji Electric··············································· 9-31
9.2.9 Standard device profile area ········································································· 9-32
9.2.10 Inverter operation in CANopen communication ·················································· 9-33
[ 1 ] Operation according to CANopen’s drive profile (DSP 402) ·································· 9-33
[ 2 ] Operation according to the inverter function code S06 ········································ 9-38
9.2.11 Heartbeat and Node Guarding ······································································ 9-42
[ 1 ] Heartbeat ································································································ 9-42
[ 2 ] Node Guarding ························································································· 9-43
9.2.12 Behavior upon detection of CANopen network disconnection ································ 9-44
[ 1 ] Related object and function code list ····························································· 9-44
[ 2 ] Restart from CANopen network disconnection failure ·········································· 9-46
9.2.13 Alarm code list ·························································································· 9-47
9.2.14 Other points to note ··················································································· 9-48
9.2.15 Keypad LED operation monitor “ 3_40 ” ·························································· 9-49
9.2.16 Keypad LED operation monitor “ 3_41 ” ·························································· 9-49
9.2.17 Keypad LED operation monitor “ 3_42 ” ·························································· 9-49
9.2.18 Keypad LED maintenance information “ 5_45 ” ················································· 9-49
9.2.19 Keypad LED maintenance information “ 5_46 ” ················································· 9-49
9.3 FRENIC Loader Overview ··················································································· 9-50
9.3.1 Modes ···································································································· 9-50
9.3.2 Connection ······························································································ 9-51
9.3.3 Function overview ····················································································· 9-51
[ 1 ] Configuring inverter’s function code ······························································· 9-51
[ 2 ] Multi-monitor ···························································································· 9-52
[ 3 ] Running status monitor ··············································································· 9-53
[ 4 ] Test-running ···························································································· 9-54
[ 5 ] Real-time trace ························································································ 9-55
[ 6 ] Historical trace ························································································· 9-56