130 Printer Connection and Software Installation
WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
• WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required
for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an access
point, is available only when the access points of your wireless router supports WPS.
• Before WPS-PIN starts, you will need to enter your PIN code at the web page of the wireless LAN access point. For details,
refer to the manuals provided with the wireless LAN access point.
1 Press the (System) button.
2 Select Tools tab.
3 Select Admin Settings.
4 Select Network.
5 Select Wireless.
6 Select WPS Setup.
7 Select PIN Code.
8 Write down the displayed 8-digit PIN code or select Print PIN Code. The PIN code is printed.
9 Select Start Configuration.
10 Ensure that the message Setting WPS is displayed, and enter the PIN code displayed on step 8 into the web
page of the wireless LAN access point.
NOTE:
• For details about WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN
access point.
When the WPS operation is successful and the printer is rebooted, wireless settings are correctly configured.
To Next Page
Loading...
Need help?
General
