140 Printing Basics
Standard 550 Sheet Tray and Optional 550 Sheet Feeder
*:XML Paper Specification (XPS) driver does not support custom size paper.
NOTE:
• SEF indicates the paper feed direction; SEF stands for short-edge feed.
• For Plain and Label paper, you can set the paper density by selecting Adjust Paper Type (Lightweight or
Heavyweight) under Maintenance from the operator panel. Once you set the Adjust Paper Type settings, the
printer uses the settings for Plain and Label paper.
See also:
• "Loading Print Media in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 144
• "Loading Letterhead in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 146
• "Loading Print Media in the Bypass Tray" on page 147
• "Loading Envelope in the Bypass Tray" on page 148
• "Loading Letterhead in the Bypass Tray" on page 149
Printing on print media that differs from the paper size or paper type selected on the print driver, or loading print
media into an unsuitable paper tray for printing, may lead to paper jams. To ensure that printing is correctly done,
select the correct paper size, paper type, and paper tray.
Paper Size A4 SEF (210 × 297 mm)
B5 SEF (182
× 257 mm)
A5 SEF (148
× 210 mm)
Letter SEF (8.5
× 11 inches)
Executive SEF (7.25
× 10.5 inches)
Folio SEF (8.5
× 13 inches)
Legal SEF (8.5
× 14 inches)
Custom size
*
:
Width: 148–215.9 mm (5.83–8.5 inches)
Length: 210–355.6 mm (8.27 –14 inches)
Paper Type Plain (Lightweight)
Plain (Heavyweight)
Other Type
Lightweight Cardstock
Heavyweight Cardstock
Light Glossy Cardstock
Heavy Glossy Cardstock
Letterhead
Hole Punched
Colored
Loading Capacity 550 sheets of standard paper
To Next Page
Loading...
Need help?
General
