© 2011 Fujitsu Technology Solutions
Severity Level 0
Error Message User reset unit <unit-id>
Explanation Unit <unit-id> is reset by user.
Recommended Action The unit is reset from stack master.
Severity Level 6
Error Message Fail to send RESET command to unit <unit-id>.
Explanation Fail to send RESET command to unit <unit-id>.
Recommended Action Check the stacking cable is connected probably or not.
Severity Level 6
Error Message Failure propagating config info from non-management unit
Explanation Only management unit could propagate the Config info to stack
members.
Recommended Action Configuration file is only allowed to be distributed by stack
master.
Severity Level 6
Error Message Startup Config propagation compete
Explanation Startup configuration file propagation is successful
Recommended Action The configuration is propogated successfully.
Severity Level 4
Error Message Startup Config propagation failed
Explanation Startup configuration propagation failed
Recommended Action Checking the stacking cable if it is connected probably or not.
Severity Level 6
Error Message Running Config propagation failed
Explanation Running configuration propagation failed
Recommended Action Checking the stacking cable if it is connected probably or not.
Severity Level 6
Error Message Request configuration file download [2] to unit <unit-id> failed
rc=<reason>
Explanation Fail to send the request to unit <unit-id> for configuration file
downloading.
Recommended Action Checking the stacking cable if it is connected probably or not.
To Next Page
Loading...
