Concluding steps
▶
If applicable, install the SAS expander board, see "Installing the SAS
expander board" on page 268
.
▶
Install the system fan module, see "Installing the system fan module" on
page 85.
▶
If applicable, install the expansion cards, see "Installing an expansion card"
on page 299.
▶
"Reassembling" on page 66.
▶
"Connecting the power cord" on page 79.
▶
"Switching on the server" on page 81.
▶
"Resuming BitLocker functionality" on page 121.
▶
Enable the TPM in the system board BIOS, see "Enabling the TPM in the
system board BIOS".
Enabling the TPM in the system board BIOS
Proceed as follows:
▶
Switch on or restart your server.
▶
As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶
Select the Advanced menu.
▶
Select the Trusted Computing submenu.
▶
Set the TPM Support and TPM State settings to Enabled.
▶
Under Pending TPM operation, select the desired TPM operation mode.
▶
Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
System board and components
420 Upgrade and Maintenance Manual TX1330 M4
To Next Page
Loading...
