FUTABA T12K

101
<Functions of Linkage Menu>
Telemetry Speech function
*There are two languages available in the Speech data, English
and German.
*The language chosen for the Speech data will affect only the
Speech function. It will not change the language used in the
transmitter's text display.
*The Speech function can only be used with headphones
plugged into the phone jack.
*You will need to purchase headphones or earphones with a
3.5plug.
Earphone plug
●ACT/INHbuttonandON/OFFswitch button
ofthespeechfunctionareaddedtothe
telemetryalertscreen.
When the speech function is valid, "on" is displayed.
When the speech function is INH or the switch is off,
nothing is displayed.
The speech function does not work when the
telemetry data is not received, even if "on" is
displayed.
ACT/INH button ON/OFF button
●Whenthetelemetryalertoccurred,the
speechfunctionworks.
*The format of the speech output is
[sensor type
］
[data
］［
unit]
［
data
］［
data
］［
data
］［
data
］
Ex. Rx battery
「
battery
」「
seven point four
」「
volt
」「
seven point four
」「
seven
point four
」「
seven point four
」「
seven point four
」
*If the telemetry data is changed frequently, the speech data
will not be the same as the displayed data.
*The format of the speech output is
"warning" [sensor type
］
[data
］［
unit
］
Ex. Rx battery
「
warning
」「
battery
」「
four point zero
」「
volt
」
*If the telemetry data is changed frequently, the speech data
will not be the same as the displayed data.
When the ALERT button is ACT, the
speech function works when the alert
occurs.