USER NAME
User name registration
This function allows the modelers to change the
T12K user name.
*A name of up to 10 characters can be entered as the user
name. Please note that a space is counted as one character.
User name registration
1. Change the user name as described below:
[Moving cursor in user name (candidate)]
Select [←] or [→], and push the RTN button.
[Deleting a character]
When [DELETE] is selected and the RTN
button is pushed, the character immediately
after the cursor is deleted.
[Adding a character]
When a character is selected from the
character list and the RTN button is pushed,
that character is added at the position
immediately after the cursor.
*A name of up to 10 characters long can be entered as the
user name. (A space is counted as 1 character.)
2. Upon completing the input, select [ENTER]
and push the RTN button. (To terminate
input and return to the original state, select
[CANCEL] and push the RTN button.)
(Character list 1/3)
(Character list 2/3)
(Character list 3/3)
● Select [USER NAME] at the System menu and
access the setup screen shown below by pushing
the RTN button.
User name (candidate)
Scrolling
● Moving cursor
● To next page
● Data is entered
To Next Page
Loading...
