Adjusting stick length
You can adjust the length of the sticks to fit
your hand size. This is simple and recommended!
1. Hold lever head "B" and turn lever head "A"
counter-clockwise to release the lock.
2. Adjust stick length, then hold lever head "B"
and turn lever head "A" clockwise to lock.
A
Lever Head
B
Lever Head
Stick Adjustment
Remove these four screws
to remove the rear
transmitter case.
Remove the battery cover on the rear
of the transmitter, then unplug and
remove the battery.
Adjusting stick tension
You may adjust the tension of your sticks to provide the feel that you prefer for ying. To adjust the stick
tension springs, you'll rst have to remove the rear of the transmitter case.
To Next Page
Loading...
