micro SD Card
(Secure Digital memory card) (Not included)
The T12K transmitter model data can be
stored by using any commonly found micro SD
card. When T12K transmitter update software is
released, the software is updated using a micro
SD card.
Restrictions when using a micro SD card
The following restrictions apply when using a
micro SD card:
*The micro SD card must first be initialized using the
T12K dedicated format. The micro SD card cannot be
used as is without formatting to the T12K.
*Initializing destroys all the data previously saved on the
card.
*A micro SD card formatted to the T12K cannot be written
directly from a PC by Windows Explorer, etc. The les
must be converted and written by the Futaba File System
software. Files are identied by number instead of name.
This special conversion software can be downloaded from
Futaba's web site at:
http://www.futaba-rc.com/software-updates.html
2. The micro SD card slot is shown in the gure
below.
Inserting/removing the micro SD card
1. Turn off the transmitter power and then
open the battery cover at the back side of
the transmitter.
(Commercial product)
SD standard and SDHC standard microSD cards
SD/SDHC format. Maximum size 2GB. SDXC
format is not supported.
(Some models may not be operated by card.)
*The data in the memory card cannot be
guaranteed regardless of the contents and cause
of trouble or damage. Always back-up the
valuable data in the memory card.
Caution
Do not install or remove the micro
SD card with the card slot pointing at
your face.
If you remove your ngers quickly, the micro SD
card could pop out and strike your face, which
could be dangerous.
Do not install and remove the micro
SD card with the micro SD card slot
facing your face.
If you remove your fingers quickly, the microSD
card may fly out and strike your face and is
dangerous.
S ince the m icro SD card is a
precision device, do not subject it to
unreasonable force or shock.
As the micro SD card is a precision
device, do not use excessive force
when installing it.
microSD card slot
To Next Page
Loading...
