FUTABA T12K

64
<Functions of System Menu>
● Select the function name
and return to the System
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
<Push Dial>
RETURN
Setting Up and Adjusting the Quick Select Models
1. The Start Selection (START SEL.) menu is
accessed through the T12K System Menu.
Turn the transmitter ON and then push the SYS
(System) button two times. Use the Push Dial
to highlight the Start Selection (START SEL.) and
then push the Return (RTN) button to conrm
the selection.
2.The Start Selection (START SEL.) menu option
defaults to OFF, meaning that Quick Select
and Model Select are not applicable. To
activate the Quick Select or Model Select,
use the Push Dial to scroll to the OFF setting
as denoted in the image. With the OFF
indication highlighted, push the Return (RTN)
button and rotate the Push Dial once again
to scroll amongst the options. With the Quick
Select (QUICK SEL.) indicated, push the Return
(RTN) button once again to make the desired
selection as indicated.
Quick Select Activation:
With the Quick Select (QUICK SEL.) option
activated, there are two additional options available
for customization: ALWAYS and MDL (Model).
These options determine if/when the Quick Select
information will appear on-screen. ALWAYS,
as the name suggests, indicates that each time
the transmitter is powered-up, the Quick Select
information will appear on-screen. The MDL
(Model) setting indicates that the Quick Select
information will appear on-screen only when
the MDL button is pushed simultaneously as the
transmitter is turned ON. With the Quick Select
mode highlighted, use the Push Dial to move to
the activation setting options. Model (MDL) is the
default setting. Push the Return (RTN) button to
open the options, then scroll to the ALWAYS setting
using the Push Dial pad. Push the Return (RTN)
button once again to nalize the selection.
START SEL can perform a model selection
immediately on startup. This is convenient for
modelers who y two or more models with a single
transmitter.
Quick Select Screen
As the name suggests, the Quick Model Select
Function enables the modeler to change the
selected models rapidly each time the transmitter is
turned ON. With a few quick pushes, it is possible
to change models whereas before it would require
a multi-step process. The T12K stores up to four
models in the Quick Select offerings.
Model Select Screen
When the transmitter is turned on, it will open to
the Model Selection Screen immediately.
START SEL.
Immediately, a model selection can be performed
Scrolling
● Moving cursor
● Selecting mode
● To input data mode
● Data is entered