FUTABA T12K

35
<Before Use>
This set uses the S.BUS/S.BUS2 system. The wiring is as simplied and streamlined as possible, even
with models that use a large number of servos. The wings can quickly be attached to the fuselage with one
simple wire, even when a large number of servos are used.
●When using S.BUS/S.BUS2, special settings and mixes in your transmitter may be unnecessary.
●S.BUS/S.BUS2 servos memorize the number of channels themselves. (Settable with the T12K)
●The S.BUS/S.BUS2 system and conventional system (receiver conventional CH used) can be mixed.
Receiver: R3008SB
Battery: FR2F1800 ( Or similar )
Switch: HSW-L
Throttle servo: BLS173SV ( Or similar )
Aileron servo: BLS174SV×2 ( Or similar )
Elevator servo: BLS173SVi×2 ( Or similar )
Rudder Servo: BLS175SV×1 ( Or similar)
HUB×3 ( Optional )
Receiver: R3008SB
Servo: S3172SV×9 ( Or similar)
HUB×4 ( Optional )
S.BUS Glider usage example
S.BUS Aerobatic plane usage example
S.BUS/S.BUS2 Installation