FUTABA T12K

131
<Model Menu (Common Functions)>
●Selectthefunctionname
andreturntotheModel
menubypushingthe RTN
buttonor pushingthe
HOME/EXITbutton.
<Push Dial>
RETURN
PROG. MIX
Programmixingcanbefreelycustomized.Uptovemixingscan
beusedforeachmodel.[Allmodeltypes]
Programmable mixing may be used to correct
undesired tendencies of the aircraft, and it may also be
used for unusual control congurations. Mixing means
that the motion of a command channel, called the
"master," is added to the motion of the mixed channel,
called "slave."
You may choose to have the Master's trim added to
the Slave channel response ("Trim" setting). The mixing
curve (Linear/5-point) can be changed. You may select
Mixing ON/OFF switch, control or you may choose to
have mixing remaining on all the time.
The Programmable mixing includes a powerful link
function, which allows Programmable mixing to be
linked with the special mixing functions, or with other
programmable mixing functions. The link function can
be set up for Master and Slave channel individually.
●Select[PROG.MIX]attheModelmenuand
accessthesetupscreenshownbelowbypushing
theRTNbutton.
●Linksetting
●Trimmodesetting
●ON/OFF
Mix setup screen call
● Movethecursortothemix#whosefunctionyouwanttoactivate
andaccessthesetupscreenbypushingtheRTNbutton.
[Linearcurve] [5-pointcurve]
●CurrentmixNo.
●MasterCH
●SlaveCH
●Switchselection
●Curveselection ●Curveselection●Offsetrate(X,Y)
●Mixingrate(Left/right,up/down)
●Pointrate(point1-5)
●Mix#
Prog. mix setting procedure
●Activate the function.
 Movethecursortothe[ACT]itemandpush
theRTNbuttontoswitchtothedatainput
mode.
 SelecttheACTmodebyscrollingthePush
dial.
*The display blinks.
 PushtheRTNbuttontoactivatethefunction
andreturntothecursormode.
*The function is activated. (ON or OFF display)
*ON/OFF switch and mix rate are not set even though the
function is activated.
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage
●Toinputdatamode
●Dataisentered