FUTABA T12K

125
<Functions of Linkage Menu>
●Selectthefunctionname
andreturntotheLinkage
menubypushingthe RTN
buttonor pushingthe
HOME/EXITbutton.
<Push Dial>
RETURN
DATA RESET
Modelmemorysettingdatareset.
This function is designed to allow you to reset
trim settings or all of the settings saved in the active
model memory. You may individually choose to
reset the following data:
T1~T4:
Reset the digital trim setting.
*The trim step amount and trim rate are not reset.
Data resetting method
1.Movethecursortotheitemyouwantto
resetandpushtheRTNbutton.
*A conrmation message appears.
2.ExecuteresetbypushingtheRTNbuttonfor
onesecond.(PushtheS1buttontocease
resetting.)
 [T1-T4]:ResetsonlytheT1-T4
 [ALLMODELSETTING]:ResetsallLinkageand
ModelMenufunctionsexceptforsystem
andlowbatteryvoltage,ModelSelectand
ModelType.
[TELEMETRY]:Resetsonlythetelemetry
functions.
All model setting:
Resets all Linkage and Model Menu functions
except for system and low battery voltage, Model
Select and Model Type.
*
If the Model Type selected is Glider, the motor function
channel is automatically reversed in the Reverse menu; all
other channels remain normal.
TELEMETRY:
Reset the telemetry setting.
●Select[DATARESET]intheLinkagemenuand
accessthesetupscreenshownbelowbypushing
theRTNbutton.
Scrolling
●Movingcursor
●Dataisentered