The R3008SB receiver features bi-directional communication with a T-FHSS Air Futaba transmitter
using the S.BUS2 port. Using the S.BUS2 port, an impressive array of telemetry sensors may be utilized.
It also includes both standard PWM output ports and S.BUS output ports.
* Telemetry is available only in the T-FHSS Air.
* The telemetry function requires the corresponding receiver (R3008SB).
* The T12K will enter and keep the ID number of the R3008SB that it is linked to.
* When using multiple receivers with one transmitter, telemetry cannot be used.
T12K
●Telemetry sensor (sold separately)
Aircraft data can be checked in the transmitter by
connecting various telemetry sensors to the S.BUS2
connector of the receiver.
number of the T12K is preset at each sensor,
the sensors can be used as is by connecting
them. There are 1
To Next Page
Loading...
