●Selectthefunctionname
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
<Push Dial>
RETURN
BUTTERFLY
[Correspondingmodeltype]:Glider,Normal:2aileronsormore
Flying:2ailerons+1apormore
This function is utilized to quickly slow the
aircraft and reduce altitude by simultaneously
raising the left and right ailerons and lowering the
aps (camber ap, brake ap).
Butterfly (Crow) produces an extremely
efcient landing conguration by accomplishing
the following:
1.Slowtheaircraft’svelocity.
2.Providewashoutatthewingtipstoreduce
the tendency to tip stall.
3.Createmorelifttowardthecenterofthe
wing,allowingittoyataslowerspeed
●MixingduringflightcanbeturnedON/OFFby
settingaswitch.(AlwaysONat[--]setting)
●Thebutterflyoperationreferencepointcanbe
offset.
●Theoperationalspeedoftheaileronsandflaps
can be adjusted.
●Thedifferentialratecanbeadjusted.
*For a description of the setting method, see the aileron
differential function.
●Butteryoperationreferencepoint
●Select[BUTTERFLY]attheModelmenu
and access the setup screen shown
below by pushing the RTN button.
*The display screen is an example. The actual
screen depends on the model type.
(Currently selected condition name)
●Servospeedsetting
●Elevatoradjustment
●Aileron/aprate
adjustment
AIL 3
(Chip Aileron)
AIL 4
(Chip Aileron)
AIL1
(Main Aileron)
AIL 2
(Main Aileron)
FLP 2
(Camber Flap)
FLP 1
(Camber Flap)
ELEVATOR
ELEVATOR 2
V-TAIL
ELEVATOR
ELEVATOR 2
AILEVATOR
FLP 3
(Brake Flap)
FLP 4
(Brake Flap)
● Mode A(Normal)
Thebutteryoperationdirectionisreversed
attheneutralposition(50%)ofthethrottle
stick.
● Mode B(ThrottlestickfullstrokeMODE)
Itdoesnotreverseattheneutralposition,
soyoucansetthebutteryoperationstart
point with the full stroke of the throttle stick.
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage
●Toinputdatamode
●Dataisentered