SYSTEM MENU
System Menu functions table
[TRAINER]: Starts and sets the trainer system.
[DISPLAY]: LCD and backlight adjustment.
[USER NAME]: User name registration.
[SOUND]: Turns off the buzzer.
[H/W SET]: H/W reverse, calibration, and stick mode.
[START SEL.]: Immediately, a model selection can be performed.
[AUTO LOCK]: The automatic lock function of two kinds of push dials.
[INFO]: Displays the program version, micro SD card information, product ID, and language selection.
[SBUS SERVO]: S.BUS servo setting.
The System Menu sets up functions of the
transmitter: This does not set up any model data.
● Call the system menu shown below by long
pushing the SYS button at the home screen,
etc.
● Select [SYSTEM MENU]
and return to the home
screen by pushing the
RTN button or pushing the
HOME/EXIT button.
●Access setup screen
<Push Dial>
● Select the function you want to set and call
the setup screen by pushing the RTN button.
Scrolling
● Moving cursor
RETURN
To Next Page
Loading...
