FUTABA T12K

97
<Functions of Linkage Menu>
●Selectthefunctionname
andreturntotheLinkage
menubypushingthe RTN
buttonor pushingthe
HOME/EXITbutton.
<Push Dial>
RETURN
TELEM.SET.
Telemetrysetting
This screen does the following setting of
telemetry.
Telemetry speech
Telemetry logging
Telemetry alarm
*It cannot be used in S-FHSS mode
●Select[TELEM.SET.]intheLinkagemenuand
accessthesetupscreenshownbelowbypushing
theRTNbutton.
The speech language installed is
indicated. When the speech data is
not installed, "----------" is displayed.
The version No. of the speech data
file is indicated. When the speech
data is not installed, nothing is
displayed.
The interval of speech can be set.
The setting range is from 0 [Sec] to
30 [Sec].
Telemetry Data Logging
YoumusthaveamicroSDcardinsertedtousedatalogging.
ACT/INHbutton,ON/OFFswitchandINTERVALbuttonhasbeenaddedto"TELEM.SET."screen.
WhentheLOGGINGissettoACTandON,datawillbeloggedbasedontheINTERVALset.
Logging ON/OFF switch
When the logging function
is ON, "ON" is displayed
here. Logging ON/OFF
switch.
ACT/INH
Logged data is written to
the SD at the interval input
here
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage
●Toinputdatamode
●Dataisentered