FUTABA T12K - Page 98

98
<Functions of Linkage Menu>
LOG1.However,ifthemaximumnumberofrecordsis
reached(6393),thesystemwillcreateanewlenamed
"LOG2".Ifadditionallesareneededtheywillbenamed
sequentially,"LOG3",LOG4andsoon.
Theloggedelapsedtimewillcontinuetocountineach
ofthelogles.
Loglesmaybemergedafterbeingimportedintoa
spreadsheetorsimilarsoftware.
*WhentheINTERVALis0sec,theactualintervaltimeis
settoapproximately0.1Sec.
*FFS Ver.3.0 (free download)isnecessarytoexportthe
loggeddatafromthemicroSDcard.
The"Export"functionofFFSVer.3.0.createsa.cvsle
fromtheLOGxdatale.Thedelimiteroftheexported
leswillbe"comma"or"semi-colon"basedonthe
defaultsettingofthePCusedtoimportthedata.
Caution
*PleasedoNOTuseMODELSELECTfunctionwhilethe
loggingfunctionisON.
◆ The T12K writes a tiny le system to the micro SD
card. Please note the following information about
Data Logging.
*Approximately0.3secisneededtowriteanewle
tothemicroSDcard. Thismeanstheactualstartof
loggingdatais0.3Secaftertheloggingswitchisturned
on.
*Amaximumof6393recordscanbesavedperle.
(Eachrecordcontainstheelapsedtime,CHdataandthe
telemetrydata.)
*Ifthemaximumof6393recordsisreachedduringthe
loggingprocess,theT12Kwillautomaticallycreatea
newleandcontinuetologdata.Remember,ifthe
systemtakesapproximately0.3sectocreatethenew
le,therewillbealapseintheloggeddataduringthat
periodoftime.
*ThelenamesoftheloggeddataonthemicroSDcard
arexed.Therstlewillbelabeled"LOG1".
IftheloggingON/OFFswitchiscycledduringthesame
yingsession,thedatawillcontinuetobewrittento
If the pause switch is turned on while the telemetry data is
recorded, recording the telemetry data to the memory card
is stopped temporarily. When the pause switch is turned off,
logging the telemetry data is resumed and recorded to same
data le after the interval time.
This is a hardware for the pause switch of the telemetry
logging function.
TELEMETRY DATA LOG (icon)
Thecardiconindicatesthatthetelemetrydataloggingfunctionworks at HOME screen and TELEM.
MONIscreen.
Loggingdataisstopped.
Loggingdataisstopped.
Loggingdataisrunning.
Loggingdataisrunning.