FUTABA T12K

128
<Model Menu (Common Functions)>
Condition delay setting
(Setup screen page 2)
1.Selecttheconditionwhichyouwanttoset.
2.Movethecursortothe"DELAY"iconofthe
channelyouwanttosetandpushtheRTN
buttontoswitchtothedatainputmode.
 AdjustthedelayamountbyscrollingthePush
dial.
 Initialvalue:0
 Adjustmentrange:0~27(maximumdelay)
3.PushtheRTNbuttontoendadjustmentand
returntothecursormode.
Condition Vibrator
Whentheconditionischanged,itinformsby
thevibrator.
*Condition after switching, the vibrator is activated
by a slight delay.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
The vibration patterns (4 types)