Grandstream Networks UCM6104 User Manual

P a g e | 208
UCM6100 Series User Manual
Version 1.0.18.13
Inbound Multiple
Mode
Multiple mode allows user to switch between destinations of the inbound rule by
feature codes. Configure related feature codes as described in [Inbound Route:
Multiple Mode]. If this option is enabled, user can use feature code to switch
between different destinations.
Dial Trunk
This option shows up only when "By DID" is selected. If enabled, the external users
dialing in to the trunk via this inbound route can dial outbound call using the
UCM6100’s trunk.
Privilege Level
This option shows up only when "By DID" is selected.
• Disable: Only the selected Extensions or Extension Groups are allowed to
use this rule, when enabled Filter on Source Caller ID.
• Internal: The lowest level required. All users are allowed to use this rule,
check this level might be risky for security purpose.
• Local: User with Local level, National or International level are allowed to
use this rule.
• National: Users with National or International Level are allowed to use this
rule.
• International: The highest level required. Only users with international
level are allowed to use this rule.
Allowed DID
Destination
This option shows up only when "By DID" is selected. This controls the destination
that can be reached by the external caller via the inbound route. The DID
destination are:
• Extension
• Conference
• Call Queue
• Ring Group
• Paging/Intercom Groups
• IVR
• Voicemail Groups
• Fax Extension
• Dial By Name
• All
Default Destination
Select the default destination for the inbound call.
• Extension
• Voicemail
• Conference Room
• Queue

Grandstream Networks UCM6104 Specifications

General

Brand	Grandstream Networks
Model	UCM6104
Category	PBX
Language	English