Grandstream Networks UCM6104 User Manual

P a g e | 60
UCM6100 Series User Manual
Version 1.0.18.13
IP Address
Enter the IP address for static IP settings.
IP Prefixlen
Enter the Prefix length for static settings. Default is 64
DNS Server 1
Enter the DNS server 1 address for static settings.
DNS Server 2
Enter the DNS server 2 address for static settings.
LAN (when Method is set to "Route")
DHCP Server
Select Disable, Auto or DHCPv6.
Disable: the DHCPv6 server is disabled.
Auto: Stateless address auto configuration using NDP protocol.
DHCPv6: Stateful address auto configuration using DHCPv6 protocol.
DHCP Prefix
Enter DHCP prefix. (Default is 2001:db8:2:2::)
DHCP Prefixlen
Enter the Prefix length for static settings. Default is 64
DNS Server 1
Enter the DNS server 1 address for static settings.
Default is (2001:4860:4860::8888)
DNS Server 2
Enter the DNS server 2 address for static settings.
Default is (2001:4860:4860::8844)
Allow IP Address
From
Configure starting IP address assigned by the DHCP prefix and DHCP Prefixlen.
Allow IP Address To
Configure the ending IP address assigned by the DHCP Prefix and DHCP
Prefixlen.
Default IP Lease
Time
Configure the lease time (in seconds) of the IP address.
LAN (when Method is set to "Switch")
IP Method
Select Auto or Static. The default setting is Auto
IP Address
Enter the IP address for static IP settings.
IP Prefixlen
Enter the Prefix length for static settings. Default is 64
DNS Server 1
Enter the DNS server 1 address for static settings.
DNS Server 2
Enter the DNS server 2 address for static settings.
LAN 1 / LAN 2 (when Method is set to "Dual")
Default Interface
Users will need assign the default interface to be LAN 1 (mapped to UCM6102
WAN port) or LAN 2 (mapped to UCM6102 LAN port) and then configure network
settings for LAN 1/LAN 2. The default interface is LAN 2.

Grandstream Networks UCM6104 Specifications

General

Brand	Grandstream Networks
Model	UCM6104
Category	PBX
Language	English