FC2250-UM-251-9370 1-2
1. INTRODUCTION
1.3 Main Specications
FC2250-60VC FC2250-120VC/MG/ES FC2250-180VC/ES
Configuration Flatbed
Effective cutting area 610 x 920 mm 1200 x 920 mm 1740 x 920 mm
Media hold-down method VC models: Vacuum suction, MG models: Magnetic,
ES models: Electrostatic adhesion
Maximum cutting speed 400 mm/sec (40-step range)
Cutting force High force mode: 9.8 N (1 kgf) max : 40-step range 2 to 80
Standard force mode: 4.9 N (500 gf) max : 40-step range 1 to 40
Minimum character size About 10 mm square (varies with the character font and cutting media)
Mechanical resolution 0.0025 mm
Programmable resolution GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL
TM
mode: 0.025 mm
Distance accuracy Within 0.1% of the distance moved (plotter mode)
Perpendicularity Within 0.5 mm/900 mm (plotter mode)
Repeatability Within 0.1 mm (plotter mode)
Number of pens/cutters 2
Cutter and pen types Cutter blades: Supersteel
Pens: water-based fibertip, oil-based ballpoint, disposable ink pen
*1
Cutting media Marking film (vinyl, fluorescent, reflective), Stiff paper/card up to 0.5 mm
thick, Sandblast rubber sheets up to 1 mm thick, High-intensity reflective
film. Polystyrene foam sheets
Interfaces RS-232C, USB 2.0 (full speed); auto-switching
Buffer memory 2 MB
Command sets GP-GL and HP-GL
TM
emulation
LCD panel 20 characters x 2 lines
Registration mark reading
function
Provided
Power supply 100-120 VAC, 50/60 Hz, 1.2 A max
220-240 VAC, 50/60 Hz, 0.7 A max
Operating environment 10 to 35˚C, 35 to 75% RH (non-condensing)
Guaranteed precision
operating environment
16 to +32˚C, 35% to 70% RH (non-condensing)
External dimensions
(H x W x D) Horizontal 857 x 920 x 1285 mm 944 x 1568 x 1285 mm 944 x 2068 x 1285 mm
Tilted ----
*2
1687 x 1568 x 987 mm 1687 x 2068 x 987 mm
Weight (including stand) Approx. 58 kg Approx. 69 kg Approx. 74 kg
Option Vacuum pump (Blower) [VC models only]
*1: Disposable ink pens cannot be used with the high-force pen (Pen 2 holder).
*2: The writing panel on VC models cannot be tilted.
To Next Page
Loading...
