FC2250-UM-251-9730 4-1
4. Daily Maintenance and Storage
4. Daily Maintenance and Storage
During daily maintenance, pay particular attention to the following points.
(1) Do not lubricate the plotter mechanisms.
(2) To clean the plotter’s casing, either wipe the soiled areas with a dry cloth or with a cloth that has been
dampened with a neutral detergent diluted with water.
Do not use paint thinner, benzine, alcohol, or similar solvents as they may damage the casing’s nish.
(3) If the writing panel surface is soiled, wipe it with a dry cloth. If the surface is extremely dirty, dampen the
cloth with a diluted solution of neutral detergent or alcohol.
Do not use paint thinner, benzine, or similar solvents on the writing panel. They will damage the surface.
When the plotter is not in use, follow the instructions listed below.
(1) Remove the pen from the pen carriage and store it with the pen cap on.
(2) Cover the plotter with the soft cover supplied or a cloth to keep dust off.
(3) Store the plotter in a location which is not subject to either direct sunlight or high humidity.
To Next Page
Loading...
