EasyManua.ls Logo

GRAUPNER mc-16

GRAUPNER mc-16
335 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Remote control set description
Other accessories in Internet at www.graupner.de.
Contact or visit your local dealer. He will be glad to
provide advice.
mc-16 and mc-20 series computer systems
two remote control sets with 2,4-GHz-Graupner-HoTT technology
(Hopping Telemetry Transmission)
The No. 33016 set includes
Microcomputer transmitter
mc-16HoTT with
built-in LiIo transmitter battery 1s4p/4000 mAh/3.7 V
and two 3-position switches, two proportional slid-
ers on the centre console and two side-mounted
proportional rotary controls (change reserved)
plug-in charger (4.2 V, 500 mA)
Short and long stick-tops
(No. 33000.2 and 33000.3)
bidirectional receiver Graupner GR-12L HoTT (No.
S1012) for connection of up to 6 servos GR-16
HoTT (No. 33508) for connection of up to 8 servos
USB adapter/interface (No. 7186.6) including suit-
able USB cable for connection to a PC and an
adapter cable (No. 7186.6S) for receiver updates
Micro-SD card (4 GB) with an adapter for a card
reader
Hand rests
Transmitter strap
The No. 33020 set includes
Microcomputer transmitter
mc-20 HoTT with
built-in LiIo transmitter battery 1s6p/6000 mAh/3.7 V
and twelve toggle switches (three 3-position switch-
es, fi ve 2-position switches, two centre-biased
2-position switches and two 2-position locking
switches), two momentary switches on the back of
the transmitter, two INC/DEC buttons (CTL 5 + 6)
plus two side-mounted proportional rotary controls
and two proportional sliders (specifi cation reserved)
plug-in charger (4.2 V, 500 mA)
Short and long stick-tops
(No. 33000.2 and 33000.3)
bidirectional receiver Graupner GR-12L HoTT (No.
S1012) for connection of up to 6 servos and GR-24
HoTT (No. 33512) for connection of up to 12 servos
USB adapter/interface (No. 7186.6) including suit-
able USB cable for connection to a PC and an
adapter cable (No. 7186.6S) for receiver updates
Micro-SD card (4 GB) with an adapter for a card
reader
Metal hanger for transmitter straps
Transmitter strap
Hand rests
Aluminum transmitter case
Accessories
No. Description
71.26 Transmitter straps, Graupner HoTT
72.40 Transmitter straps, deluxe
Teacher/pupil cable for the transmitters
mc-16 HoTT and mc-20 HoTT, see
page 221
Replacement parts
No. Description
3080 Aluminum transmitter case, HoTT,
400x300x150 mm
33000.1 Transmitter battery, fl at LiIo, single cell six-
pack/6000 mAh 3.7 V TX
33002.1
Micro-SD card, 4 GB for HoTT transmitter
33012.2 Transmitter metal hanger for
mc-16 and
mc-20 HoTT
33012.3 Hand rests for the transmitters
mc-16
and mc-20 HoTT (2 piece)

Table of Contents

Other manuals for GRAUPNER mc-16

Related product manuals