75
Program description - Copy / Erase
Copy ight phase
Select the “Copy fl ight phase” sub-menu with the
selection keys of the left or right four-way button then
tap on the SET key.
=>
=>
=>
=>
=>
=>
=>
Copy flight phase
Erase model
Copy model–>model
Export to SD
Import from SD
Note:
Attention!
Switch-OFF
the Receiver first!
If this message appears, there is an active telemetry
link to a receiving system. Turn off this and wait until
the display is briefl y automatically hidden afterward.
In the “Copy fl ight phase” sub-menu …
7
Copy from phase:
3
5
=>
=>
2
4
6
1
… the fl ight phase to be copied (1 … 7 for fi xed-wing
models or 1 … 6 for helicopter models) is selected with
the selection keys of the left or right four-way button
then confi rmed with a brief tap on the SET key of the
right four-way button. In the next window to appear …
7
Copy to phase:
3
5
=>
=>
2
4
6
1
… a destination must be selected and it must be con-
fi rmed too. Another confi rmation request will follow:
Phase to:
1 Normal
to be copied?
NO
YES
2 Launch
A NO response will cancel the process and return the
screen to the originating screen. If the YES response
is selected and confi rmed with a tap on the SET key
then the selected source model will be imported into
the selected destination model memory.
To Next Page
Loading...
