Great Wall hover - Disassembly of Torsion Bar Spring; For Reused Torsion Bar Spring; Installation of Torsion Bar Spring; Torsion Bar Spring

Torsion bar spring
Disassembly of torsion bar spring
Installation of torsion bar spring
Caution: There are the L and R indication marks, which must
not be exchanged on the read end of the torsion bar spring.
Mark L means the left andRforright
.
1. For reused torsion bar spring
a. Coat thin grease on the spline of torsion bar spring.
b. Align the assembly mark, install the torsion bar spring on the
torsion bar.
c. Align the assembly mark; install the adjusting arm onthtorsion
bar spring.