Great Wall hover - Troubleshooting

Clutch-2
Troubleshooting
failure cause inspection content
Shift difficulty or can not shift
Large free stroke of clutch pedal clutch Pipe
has air
Failure of clutch cylinder
Failure of clutch master cylinder
The installation position of clutch disc is not
in position; large deviation; oil on the friction
lining or broken
The clutch disc is dirty or with foreign
material
Failure of clutch cover
Adjust the free stroke of pedal
Discharge the air in clutch system
Replace
replace
Inspect the clutch disc; replace
Repair if necessary
Replace
Disengagement of transmission The clutch guide bearing is worn. Replace the guide bearing
Slide of clutch
insufficient free stroke of clutch pedal
oil on the clutch disc friction lining or broken
failure of press disc
separation rocker arm assembly is blocked
Adjust the free stroke of pedal
Inspect the clutch disc and replace it
Replace the clutch cover
Check the separation rocker arm assembly
clutch clamping
stagnation/vibration
oil on the clutch disc friction lining or broken
failure of press disc clutch membrane spring
is bend
loose of engine bracket
Inspect the clutch disc and replace
Replace the clutch cover
Correct the clutch membrane
Repair if necessary
Soft of clutch pedal
clutch pipe has air
failure of clutch cylinder
failure of clutch master cylinder
Discharge the air in clutch
replace
replace
Loud noise of clutch
Component in clutch housing is loose
Throw-out bearing is worn or dirty
guide bearing is worn
separation rocker arm assembly or pull-rod is
blocked
Repair if necessary
replace
replace
Repair if necessary