Great Wall hover - Replacement of Front Reducer Assembly Oil Seal; Replacement of Oil Seal and Major Semiaxle Oil Seal of Front Reducer Assembly

Replacement of front reducer assembly oil seal
1. Remove the front drive axle assembly
(Refer to “Removal of Front Reducer Assembly”)
2. Remove the left and right front drive shaft assem-
bly from the front drive axle assembly.
3. Remove and replace the lower oil seal according to
the removal and installation procedure of front drive
shaft assembly and install the new side oil seal on
the front drive shaft, then install them in the front
reducer assembly.
(Refer to “Removal and Installation of Front Drive Shaft
Assembly”)
Replacement of oil seal and major semiaxle oil seal of front reducer assembly
major semiaxle oil seal
major semiaxle pressing assembly
circlip
mechanical wheel of separator
Pregummed component
N
m: Specified torque