Great Wall hover - Disassembly of Transmission (SC5 M2 D C)

Disassembly of transmission (SC5M2D-C)
1.Remove the hexagon bolt M8 18 and lock plate.
Caution: The tightening torque is 14-19N
m when install the
hexagon bolt;
2.Remove the odometer driven gear assembly
Use the special tools to remove the odometer driven gear assembly
3.Remove the rear housing assembly
a. Remove 6 M10
1.25 30 hexagon bolts
Caution: The tightening torque is 14-19N
m when installs 6
M10
1.25 30 hexagon bolts.
b. Use the rubber hammer to knock the rear housing and take out the
rear housing assembly.
4. Remove 2 location pins and bushes.