Great Wall hover - Disassembly of Front Hub and Steering Knuckle Assembly; Removal of Lower Suspension Arm

2. Disconnect the vibration damper from the lower
arm.
3. Disassembly of torsion bar spring
(Refer to Section “Torsion Bar Spring”)
Lower suspension arm
Removal of lower suspension arm
1. Disconnect the connecting rod of stabilizer bar
from the lower arm
a. Use the jack to support the lower arm.
b. Remove the connecting nut; disconnect the connecting rod of
sta bilizer bar form the lower arm.
5. Remove the front shaft of lower arm
a. Make the mark on the adjusting cam.
special tools