Appendix A-10
Wash, base-coat and stick according to the corresponding positions showed
by the broken line in the Figure
the auto body
side window glass
Control item Request Control mean
Apply washer on side
window sticking region
Evenly apply it on the sticking region with the width of about
25mm and completely volatilize it.
Viewing confirmation
Apply base-coater on side
window sticking region
Shake the base-coater to be sufficiently even (for at least 1
minute) followed by the even application on the sticking region
with the width of about 20mm and dry it for 2-15minutes
Viewing confirmation
Apply washer on side
window glass frame
Wash the glass frame with the width of about 25mm and
volatilize the washer completely.
Viewing confirmation
Apply base coater on side
window glass frame
Shake the base-coater to be sufficiently even followed by the
even application on the glass frame with the width of about
2omm and dry it for 2-15 minutes.
Viewing confirmation
Apply adhesive on side
window glass frame
Vertically apply the glass adhesive on the glass frame and make
it even, continuous. Height: 12mm, width 8mm
Viewing confirmation
Side window fixing Instantly install and fix the glass after the glass adhesive
application.
Viewing /handle confirmation
To Next Page
Loading...
