Transmission-31
7.Remove the shouldered lock screw plug M14 1.5 10
Caution: When install the shouldered lock screw plug M14
1.5
10, the tightening torque is within 26-36N m
8.Remove the shouldered lock screw plug
a. Use the wrench to remove the shouldered lock screw plug M12
1.25 10
Caution: When install the shouldered lock screw plug M14
1.5
10, the tightening torque is within 26-36N m
b.Takeout mushroom lock spring
c. Use the magnetic rod to take out the steel ball.
9.Remove the transfer case cover
a. Use the wrench to remove 12 connecting bolts M10
1.25 65
between the transfer case cover and tranafer case housing.
Caution: The tightening torque is 26-36N
m when install the
bolt M10
1.25 65.
To Next Page
Loading...
