1-6
z The patch matches the device type and software version.
z The patch install command changes the patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.
Step-by-Step Patch Installation
Step-by-Step Patch Installation Task List
Task Remarks
Configuring the Patch File Location Optional
Loading a Patch File Required
Activating Patches Required
Confirm Running Patches Optional
Configuring the Patch File Location
Follow these steps to configure the patch file location:
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the patch file location
patch location patch-location
Optional
flash: by default
z The directory specified by the patch-location argument must exist on each member device. If one
member device does not have such directory, the system cannot locate the patch file on the
member device.
z The patch install command changes patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.
For example, if you execute the patch location xxx command and then the patch install yyy
command, the patch file location automatically changes from xxx to yyy.
Loading a Patch File
Loading the right patch files is the basis of other hotfixing operations. The system loads a patch file from
the flash by default. It will failed if the system cannot find the patch file on the flash.
To Next Page
Loading...
Need help?
General