Features Description
PoE
The Power over Ethernet (PoE) feature enables the power sourcing
equipment (PSE) to feed powered devices (PDs) from Ethernet ports
through twisted pair cables. This document describes:
z PoE overview
z Configuring the PoE Interface
z Configuring PoE power management
z Configuring the PoE monitoring function
z Online upgrading the PSE processing software
z Configuring a PD Disconnection Detection Mode
z Enabling the PSE to detect nonstandard PDs
Track
The track module is used to implement collaboration between different
modules through established collaboration objects. The detection
modules trigger the application modules to perform certain operations
through the track module. This document describes:
z Track Overview
z Configuring Collaboration Between the Track Module and the
Detection Modules
z Configuring Collaboration Between the Track Module and the
Application Modules
NQA
NQA analyzes network performance, services and service quality by
sending test packets to provide you with network performance and
service quality parameters. This document describes:
z NQA Overview
z Configuring the NQA Server
z Enabling the NQA Client
z Creating an NQA Test Group
z Configuring an NQA Test Group
z Configuring the Collaboration Function
z Configuring Trap Delivery
z Configuring the NQA Statistics Function
z Configuring Optional Parameters Common to an NQA Test Group
z Scheduling an NQA Test Group
NTP
Network Time Protocol (NTP) is the TCP/IP that advertises the accurate
time throughout the network. This document describes:
z NTP overview
z Configuring the Operation Modes of NTP
z Configuring Optional Parameters of NTP
z Configuring Access-Control Rights
z Configuring NTP Authentication
Hotfix
Hotfix is a fast, cost-effective method to fix software defects of the device
without interrupting the running services. This document describes:
z Hotfix Overview
z One-Step Patch Installation
z Step-by-Step Patch Installation
z Step-by-Step Patch Uninstallation
z One-Step Patch Uninstallation