H3C S5120-EI Series User Manual

2-2
z If you use a PC to connect to the Console port, launch a terminal emulation utility (such as
HyperTerminal in Windows 9X/Windows 2000/Windows XP) and perform the configuration shown
in
Figure 2-2 through Figure 2-4 for the connection to be created. Normally, the parameters of a
terminal are configured as those listed in
Table 2-1.
Figure 2-2 Create a connection
Figure 2-3 Specify the port used to establish the connection

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English