2
_____________________________________________________________________________________________
1.1 Product Introduction
______________________________________________________________________________________________
(6) REMOTE CONTROL BOX
The 9613 REMOTE CONTROL BOX (single-hand) or the 9614 REMOTE
CONTROL BOX (dual-hand) can be connected to the external switch
terminal to perform 3153 start/stop control.
(7) External I/O
The external I/O terminal generates signals according to the state of the
3153. It can be used to feed signals for the
START
and
STOP
key.
(8) RS-232C/GP-IB interface as a standard feature
Automatic testing and saving of the test results are possible with the use of a
computer.
(9) Program test
Withstand-voltage and insulation-resistance tests under various conditions
can be conducted successively at your option. Through the use of a 3930
HIGH VOLTAGE SCANNER, many test points can be tested at one time.
Up to 32 files can be created, with each file containing up to 50 steps.
(10) Switching-power-supply method
The adoption of the PWM switching power supply allows the unit to output
any preset voltage. The test voltage is not affected by fluctuations in the
power-supply voltage of this unit.
To Next Page
Loading...
