Hioki 3153 - General Specifications

226
_____________________________________________________________________________________________
11.2 General Specifications
______________________________________________________________________________________________
Test function Withstand-voltage test (AC50 Hz, AC60 Hz, DC), Insulation-resistance test
Test mode Manual test mode: W/I
Auto test mode: W (AC/DC)
→
I
I
→
W (AC/DC)
Program test mode: Tests set by program functions
Display Fluorescent tube display (digital display), analog meter
Monitor function Output voltage / Current / Measurement resistance
Monitor cycle 2 Hz or faster
Operating temperature and
humidity
0to40 (32 to 104 ), 80% RH or less (no condensation)
Storage temperature and
humidity
-10 to 50 (14 to 122 ), 90% RH or less (no condensation)
Operating temperature and
humidity for guaranteed
accuracy
Period of guaranteed accuracy
23 5 (73 9 ), 80% RH or less (no condensation)
after 10 minutes minimum warm-up
1 year
Product warranty period 1 year
Operating Environment Indoors, Pollution Degree 2, max. 2000 m (6562 feet) height
Rated power supply voltage 100 to 120 VAC, 200 to 240 V AC (Voltage fluctuations of 10% from the
rated supply voltage are taken into account.)
Rated power supply frequency 50/60 Hz
Fuse 250VT10AL (100 to 120 V), 250VT5AL (200 to 240 V)
Dielectric strength 1.62 kVAC, 15 mA, 1 min. between power supply and frame
Maximum rated power 1000 VA
Backup battery and life Approx. 10 years
（
25 reference value
）
Dimensions Approx. 320W
×
155H
×
480D mm (12.60"W
×
6.10"H
×
18.90"D)
(excluding projections)
Mass Approx. 18 kg (634.9 oz.)
Accessories 9615 H.V. TEST LEAD (high voltage side and return, 1 each)
Power cord*, Spare fuse*, Instruction manual
*: To be designated at the time of ordering, in accordance with the power-
supply voltage to be used
Options 3930 HIGH VOLTAGE SCANNER
9151-02 GP-IB CONNECTOR CABLE (2 m)
9267 SAFETY TEST DATA MANAGEMENT SOFTWARE
9637 RS-232C CABLE (9 pin - 9 pin/ 1.8 m)
9638 RS-232C CABLE (9 pin - 25 pin/ 1.8 m)
9613 REMOTE CONTROL BOX (SINGLE)
9614 REMOTE CONTROL BOX (DUAL)
Standard Applying
EMC
Safety
EN61326 Class A
EN61010
11.2 General Specifications