Hioki 3153 - Response Formats

201
_____________________________________________________________________________________________
10.4 Response Formats
______________________________________________________________________________________________
10.4 Response Formats
The response format is identical to the VFD display format, except that the
former lacks spaces.
Test-voltage value, Measured voltage value
(withstand-voltage mode, unit: kV)
□
.
□□
Three digits (in NR2 format)
Test-voltage value, Measured voltage value
(insulation-resistance mode, unit: V)
□□□□
□□□
□□
□
One, two, three or four digits (in NR1 format)
Upper-limit value, Lower-limit value
(withstand-voltage mode, unit: mA)
□□□
□□
.
□
□
.
□
Two or three digits (in NR1 or NR2 format)
Upper-limit value, Lower-limit, Resistance value (insulation-
resistance mode, unit: MΩ)
□□□□
□□□
□□
.
□
□
.
□□
Three or four digits (in NR1 or NR2 format)
Measured current value (withstand-voltage mode, unit: mA)
□□□
□□
.
□
□
.
□□
Three or four digits (in NR1 or NR2 format)
Measured resistance value (insulation-resistance mode, unit: MΩ)
□□□□ □□□
□□□
.
□ □□
.
□
□□
.
□□ □
.
□□
□
.
□□□
Three or four digits (in NR1 or NR2 format)