Honeywell UDC2800 User Manual

6. Click the arrow icon at the top left corner to return to the
configurable groups page.
7. Click the arrow icon at the top left corner again, a dialog appears
to ask you to save the changed configuration for later use in the
mobile device.
8. Enter File Name and Description, and click Save.
NOTE: If user do not want to save the configuration, click
Cancel.
297
Chapter 10 - Configuration via Honeywell EasySet

Honeywell UDC2800 Specifications

General

Control Modes	PID, ON/OFF, Manual
Mounting	Panel Mount
Display	Dual 4-digit LED
Input Types	Thermocouple, RTD, mA, mV, V
Output Types	Relay
Power Supply	100-240 VAC, 50/60 Hz
Communication	RS-485 Modbus RTU
Enclosure Rating	NEMA 4X