Honeywell UDC2800 - Page 389

Parameter Description
Register Address
Access Description
Hex Decimal
Aux Output 00A2 40163
R Floating Point in
Engineering Units.
Setpoint Ramp Time 00A4 40165
R/W Floating Point in
Engineering Units.
Setpoint Ramp Setpoint 00A6 40167
R/W Floating Point in
Engineering Units.
Input 1 Ratio 00A8 40169
R/W Floating Point in
Engineering Units.
Input 1 Bias 00AA 40171
R/W Floating Point in
Engineering Units.
Input 2 Ratio 00AC 40173
R/W Floating Point in
Engineering Units.
Input 2 Bias 00AE 40175
R/W Floating Point in
Engineering Units.
SP/PV Switch 1 to 2 00B0 40177
R/W Floating Point in
Engineering Units.
SP/PV Switch 2 to 3 00B2 40179
R/W Floating Point in
Engineering Units.
Current 1 Output 00C0 40193
R Floating Point in
Engineering Units.
Fuzzy Enable 00F6 40247
R/W Unsigned 16 bit integer
0=Disable
1=Enable
Shed Enable 00F8 40249
R/W Bit Packed
Bit 0: 0: Disable 1: Enable
Auto/Manual State 00FA 40251
R/W Bit Packed
Bit 0: 0: Manual; 1: Auto
Bit 1-15: Unused
Set Point State 00FB 40252
R/W Unsigned 16 bit integer
0=SP1
389
Chapter 12 - Standard Modbus Read, Write and Override Parameters