Honeywell UDC2800 - Page 388

388
Parameter Description
Register Address
Access Description
Hex Decimal
Engineering Units.
SP Override Value 0082 40131
R/W Floating Point in
Engineering Units.
Output Override Value 0084 40133
R/W Floating Point in
Engineering Units.
Ratio, CSP parameters 0086 40135
R/W Floating Point in
Engineering Units.
Bias, CSP parameters 0088 40137
R/W Floating Point in
Engineering Units.
Deviation 008A 40139
R Floating Point in
Engineering Units.
LSP #3 008C 40141
R/W Floating Point in
Engineering Units.
LSP #4 008E 40143
R/W Floating Point in
Engineering Units.
Gain #3 0090 40145
R/W Floating Point in
Engineering Units.
Reset #3 0092 40147
R/W Floating Point in
Engineering Units.
Rate #3 0094 40149
R/W Floating Point in
Engineering Units.
Gain #4 0096 40151
R/W Floating Point in
Engineering Units.
Reset #4 0098 40153
R/W Floating Point in
Engineering Units.
Rate #4 009A 40155
R/W Floating Point in
Engineering Units.
PV/SP switch 3 to 4 009C 40157
R/W Floating Point in
Engineering Units.
ALG1 Bias 009E 40159
R/W Floating Point in
Engineering Units.
Chapter 12 - Standard Modbus Read, Write and Override Parameters