64
Figure 3-14: Ethernet Communications Option Connections
Item Description
1 Do not run the communications lines in the same conduit as AC power. Correct
connections may require the use of an Ethernet cross-over cable.
2 Use shielded twisted pair, Category 5e (STP CAT5e) Ethernet cable.
For Ethernet cable with RJ45 connector, an Ethernet Adapter Kit is
required to install on the terminals.
Figure 3-15: Auxiliary Output and Digital Inputs Option Connections
Item Description
1 Auxiliary Output and Digital Input 2 are mutually exclusive.
Chapter 3 - Installation
To Next Page
Loading...
