Table 40: Chassis Management Module 1 (BT8A78CMM1) Specifications (continued)
SpecificationItem
Typical: 70 W
Maximum: 77 W
Power Consumption (40°C ambient)
NOTE: Before using for planning or implementation
purposes, contact Juniper Networks Support to
confirm the power consumption values.
1.86 GHz Dual-CoreCPU
4 GB DRAMMemory
16 GB FlashNon-volatile Storage
CLI, SNMP, NETCONFSupported Management Protocols
SpeedStandardConnectorInterfaces
115200 bps 8N1
(8 data bits, No parity, 1 stop bit)
RS232RJ45Craft Serial
10/100/1000 MbpsIEEE 802.3
Ethernet
RJ45EXP-1 to EXP-3
10/100/1000 MbpsIEEE 802.3
Ethernet
RJ45Management
Ethernet
10/100/1000 MbpsIEEE 802.3
Ethernet
RJ45Craft Ethernet
n/aUSB 2.0USB 2.0
Standard-A
Receptacle
USB-1
DescriptionColorNameLEDs
Not used.AmberIdentify
The CMM is operationally up.GreenActive
The CMM is operationally down or the CMM is not recognized.RedFail
The CMM does not match the provisioned CMM.BlueHot Swap
The link is up.GreenLink (right)Port LEDs
The LED flickers to indicate activity on the link.GreenActivity (left)
Copyright © 2019, Juniper Networks, Inc.112
BTI7800 Series Hardware Overview and Installation Guide
To Next Page
Loading...
Need help?
General
