Table 52: show interfaces xe- Output Fields (continued)
Level of OutputField DescriptionField Name
brief
detail
extensive
none
Name of the logical interface.Logical interface
detail
extensive
none
Index number of the logical interface, which reflects its initialization sequence.Index
detail
extensive
none
SNMP interface index number for the logical interface.SNMP ifIndex
detail
extensive
Unique number for use by Juniper Networks technical support only.Generation
brief
detail
extensive
none
User-configured description of the interface.Description
brief
detail
extensive
none
Information about the logical interface.Flags
brief
detail
extensive
none
Encapsulation on the logical interface.Encapsulation
detail
extensive
Number and rate of bytes and packets received (input) and transmitted (output)
on the specified interface.
NOTE: For logical interfaces on EX Series switches, the traffic statistics fields
in show interfaces commands show only control traffic; the traffic statistics do
not include data traffic.
Traffic statistics
extensiveNumber and rate of bytes and packets destined to and from the switch.Local statistics
extensiveNumber and rate of bytes and packets transiting the switch.Transit statistics
detail
extensive
none
Protocol family.Protocol
detail
extensive
Unique number for use by Juniper Networks technical support only.Generation
315Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Operational Commands