4.4 Basic Scanning Mode
149
Chapter 4
2D-TDI-mode parameter list
Item Functions
[Tx Level]
Sets the transmission voltage.
• Displayed in all modes.
[C Scale] Velocity setting for 2D-TDI-mode
[C Gain] Gain setting for 2D-TDI-mode
[Temporal] Repeated transmission count setting for 2D-TDI-mode
[C Density] Acoustic line density setting for 2D-TDI-mode
[Spatial Avg.] Spatial direction smoothing setting for 2D-TDI-mode
[C Time Avg.] Time direction smoothing setting for 2D-TDI-mode
[C Priority]
Display priority setting for 2D-TDI-mode
• A larger value represents a higher priority, being more eective in overriding B-mode.
[C Invert] Color invert setting for Directional 2D-TDI-mode
[C Baseline] Baseline setting for 2D-TDI-mode
[Color Map] Map setting for 2D-TDI-mode
[FR priority]
Setting for changing the B mode parameter to increase the 2D-TDI-mode frame rate.
• When [FR Priority] is set to anything other than [O], the setting values of THI and acoustic line
density may be limited.
To Next Page
Loading...