4.4 Basic Scanning Mode
158
4.4.9 PW-TDI-mode
PW-TDI-mode is a mode used for observing movements of the heart wall tissues.
• For transducers that can use this function, refer to "10.1.1 Transducer Technical Data and Acoustic Output".
<PW-TDI image>
Start of PW-TDI-mode
1
Press .
HINT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• You can change the settings in the [Setup] screen to skip step 1 and switch directly to PW-TDI-mode with a single-
press of the [PW-TDI] button.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
2
Press again.
• Changes to PW-TDI-mode.
• Changes to dual display and shows a trace image.
z
To exit
1
Press again.