9
Read First
Organization of the operation manual
The operation manuals consist of the following volumes.
z
Operation Manual: Fundamentals
It describes basic information on the system, such as setup for the system, part names, basic operations, common
operations, the description of each mode, and maintenance. After completing initial setups, use it as a procedure
manual for starting an examination and also as a measurement manual.
z
Operation Manual: Applications
Mainly focusing on measurement functions, the mode-specic procedures of an examination are described. In addi-
tion, the general scope of applications of the system, including Compare View or Review of study data and various
setups, are described.
z
Acoustic Power Manual
Data and reference concerning acoustic output are summarized. Refer to it as necessary.
z
Start-up Guide
A ow of operations, basic operations, frequently used functions, etc. are excerpted. For details, refer to the "Opera-
tion Manual: Fundamentals" and "Operation Manual: Applications".
z
Notes on safety
Describes safety precautions so they can be easily understood.
Notational conventions used in this document
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also
be used to indicate hazardous situation where only physical damage is likely to occur.
IMPORTANT
Information concerning the installation, operation, maintenance, points to note, etc. of the system. It does not de-
scribe any possible dangerous procedures.
HINT
Description of operational reference information.
Reference
Indication of items and pages to be referred to. Refer to them as necessary.
To Next Page
Loading...