Konica Minolta SONIMAGE HS2 - 6.1.2 Storing Clips

222
6.1 Storing Images
6.1.2 Storing Clips
Clip Store is a function to generate clips from live images, and the following two methods are available to store clips.
Function Button Functions
[Clip Store]
*
Prospective method (Default)
• Starts recording images after pressing the button.
• Image acquisition ends automatically after the elapse of the clip acquisition
time predetermined on the [Setup] screen.
• In a live state, pressing the button again before the elapse of the predeter-
mined clip acquisition time will end the acquisition process.
Retrospective method
• Always records images before the button is pressed as clips.
• The length of the clip acquisition time predetermined on the [Setup] screen
serves as the upper limit for recording.
[Cine Clip Store]
The method to generate clips from Cine data.
• Press the button to store.
• Also accessible from the Cine pop-up menu.
Refer to "5.1.3 Cine Pop-up Menu".
*
: Prospective and Retrospective methods are available and you can select the timing with which you store clips on the [Setup]
screen. The clip acquisition time can be also set.
Refer to "Patient Screen" of the "Operation Manual: Applications".
IMPORTANT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• The clips stored using [Cine Clip Store] can have a high frame rate. If a clip with a frame rate of over 60 fps is played
back on the system, the speed of playback will be slow.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• When [Display Pop-up on Storing] is set to ON on the [Setup] screen, upon completion of storing images (still images
or clips), a pop-up appears where the stored images are thumbnailed.
• While storing clips, the mode and image parameters can be changed.
In a clip whose mode or parameter is being changed, some of the frames may not be stored.
• When clips are stored during comparison with a past image, the clip of past image is not stored as a clip but stored
as a still image.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••