277
Chapter 9
9.5.1 Transmit Level Control
Adjust the transmit level and the corresponding acoustic pressure delivered through the transducer to the patient by
using the designated control on the system. It is the main system function that determines the transmitted intensity of
ultrasound for the transducer and imaging modes during real-time imaging, though it is not the only function that af-
fects the mechanical and thermal indices.
Tx Level
There are two ways to change the transmit level.
• Touch the rst value from the top. The Tx level change pop-up window will ap-
pear, allowing you to change the value by pressing the [up] / [down] button.
• Use the [Menu] button > [Tx Level] in the menu pop-up window to make a
change.
9.5 MI/TI Output Display
To Next Page